auto.wikisort.org - Automobile

Search / Calendar

The TVR 420 SEAC is a sports car designed and built by TVR between 1986 and 1988. It is considered as the ultimate "wedge" TVR[citation needed] and is the top of the TVR Tasmin "wedge" family. The SEAC models can be distinguished by the large rear spoiler and the rounder nose.

TVR 420 SEAC
Overview
ManufacturerTVR
Production1986 - 1988
37 produced
Body and chassis
ClassSports car
Body style2 - door drophead
LayoutFR layout
PlatformTVR Wedges
RelatedTVR 350i
Powertrain
EngineTVR Power Rover V8

The 420 SEAC was developed as a race car by TVR Competition Manager, Chris Schirle. Chris used his F1 experience to develop the Tasmin for competition use, achieving pole position in its first three outings at Oulton Park, Donington and Cadwell and seeing great success in the 1986/87 season winning 21 out of 24 races. At the end of the 1987 season, the SEAC was banned on grounds of homologation (not building the 200 cars required).

The acronym SEAC stands for Special Equipment Aramid Composite, which means that more than 20% of the body was kevlar unlike the other wedges, which used full fibreglass construction. The use of kevlar made the car more than 100 kg (220 lb) lighter without compromising the body rigidity. Due to problems with the finish and stiffness of the kevlar panels only the first 8-10 cars were manufactured with full kevlar bodies, the remainder had standard GRP bodies, except for the last 4 or 5 420 SEACs which had carbon fibre & glass fibre bodies. SEAC bodies were shorter and wider than the other wedges.

Other differences between the SEACs and the 350i/390SE/400SE wedge line include: a different chassis with a narrower transmission tunnel (1 or 2 were built with stainless steel chassis); the handbrake being changed to an umbrella type handle under the dash; a flat, 4 gauge dashboard; the exhaust system having twin pipes routed under the rear differential rather than a single pipe routed above it.

The use of kevlar and the highly tuned Rover V8 engine made the car extremely quick but had its effect on price, which was twice as much as a standard 350i. By 1988, when the even more powerful 450 SEAC replaced the 420 SEAC, 37 road going 420 SEACs had been built.


Specifications


Engine

Transmission

Chassis/Body

Performance




На других языках


[de] TVR 420SEAC

Der TVR 420SEAC war ein Sportwagen, den TVR in Blackpool (England) von 1986 bis 1988 herstellte. Er wird als der ultimative Keilform-TVR angesehen und war auch der letzte der Keilformfamilie. Der 420SEAC unterschied sich von seinen Brüdern. Das Akronym SEAC steht für „Special Edition Aramid Composite“ (dt.: Sonderserie aus Aramid-Verbundwerkstoff), was bedeutete, dass mehr als 20 % des Karosserie aus Aramidfasern bestand, während die Karosserien der anderen Keilformmodelle aus nur mit Glasfasern verstärktem Kunststoff hergestellt wurden. Der Einsatz von Aramid machte den Wagen über 100 kg leichter, ohne Einfluss auf dessen Verwindungssteifigkeit zu haben. Dies und der hochgezüchtete Rover-V8-Motor machten den Wagen extrem schnell, hatten aber ihre Auswirkungen auf den Preis, der beim Doppelten des Preises für einen 350i lag. Außerdem kann man die SEAC-Modelle an ihrem großen Heckspoiler und der runderen Nase erkennen. Bis 1988, als der 420SEAC durch den noch stärkeren 450SEAC ersetzt wurde, waren 40 Exemplare entstanden.
- [en] TVR 420 SEAC



Текст в блоке "Читать" взят с сайта "Википедия" и доступен по лицензии Creative Commons Attribution-ShareAlike; в отдельных случаях могут действовать дополнительные условия.

Другой контент может иметь иную лицензию. Перед использованием материалов сайта WikiSort.org внимательно изучите правила лицензирования конкретных элементов наполнения сайта.

2019-2025
WikiSort.org - проект по пересортировке и дополнению контента Википедии