The single overhead cam V6 engine introduced in 1993 was a major advancement for Chrysler. It was derived from Chrysler's first homegrown front-wheel drive V6, the Chrysler 3.3 engine. The SOHC V6 has been replaced by the Chrysler Pentastar engine.
![]() | This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (July 2019) |
![]() | |
---|---|
![]() Chrysler 3.5 L SOHC | |
Overview | |
Manufacturer | Chrysler Corporation (1993-1998) DaimlerChrysler AG (1998–2007) Chrysler LLC (2007–2009) Chrysler Group LLC (2009-2010) |
Production | 1993–2010 |
Layout | |
Configuration | Naturally aspirated 60° V6 |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Block material | Cast iron (1993-1997) Aluminum (1998-2010) |
Head material | Aluminum |
Valvetrain | Single overhead camshaft 4 valves per cyl. |
Timing drive system | Timing belt |
Compression ratio | 9.5:1, 9.9:1, 10.0:1, 10.1:1, 10.3:1, 10.4:1 |
Combustion | |
Fuel system | Sequential MPFI |
Fuel type | Gasoline |
Oil system | Wet sump |
Cooling system | Water-cooled |
Output | |
Power output | 214–260 hp (217–264 PS; 160–194 kW) |
Torque output | 221–265 lb⋅ft (31–37 kg⋅m; 300–359 N⋅m) |
Chronology | |
Predecessor | Chrysler 3.3 engine |
Successor | Chrysler Pentastar engine |
There are three major variants of this basic design: the 3.5 L, 3.2 L, and 4.0 L. Additionally, a 2.7 L DOHC version was derived.
1993–97 3.5 L engines are a non-interference engine meaning that the valves will not collide with the pistons in the event of a timing belt failure. The 1998–2001 3.2 L, the 1998–2010 3.5 L, and the 2007–2011 4.0 L engines are interference designs.
This 3.5 L; 214.7 cu in (3,518 cc) engine was a version of the 3.3 but with a larger bore of 96 mm (3.78 in) and the important addition of overhead cams. The 3.5L version has an intake arrangement with two separate manifolds and throttle bodies connected with a crossover valve. This provides better low and midrange torque. Another difference with the 3.5 as opposed to the 3.3 is that it has a timing belt, not a timing chain. The water pump is also driven by the timing belt on the 3.5, whereas on the 3.3, the accessory belt drives it.
At its debut in 1993, this engine produced 214 hp (160 kW) and 221 lb⋅ft (300 N⋅m) with an iron block and aluminium cylinder heads. The 3.5 L engine was redone entirely of aluminum in 1999 as the EGG high output, producing 247–253 hp (184–189 kW) at 6500 rpm with 250 lb⋅ft (339 N⋅m) of torque at 4000 rpm. Output from 2002–2004 for the standard output EGJ is 234 hp (174 kW) at 6000 rpm with 241 lb⋅ft (327 N⋅m) of torque at 4400 rpm. Also for 2002–2004, the EGK 3.5 L Special was built exclusively for the 300M Special, producing 255 hp (190 kW) and 258 lb⋅ft (350 N⋅m). The EGK was discontinued in 2004.[1]
The 3.5 L variant is no longer in production as of 2011, replaced by the newer Pentastar 3.6 V6.
The 3.2 L version came along with the updated LH platform in 1998. It was an SOHC 4-valve design displacing 3.2 L; 197.2 cu in (3,231 cc) with a smaller 92 mm (3.62 in) bore but the same 81 mm (3.19 in) stroke as the 3.5. It produced 225 hp (168 kW) and 225 lb⋅ft (305 N⋅m) and met the TLEV standard. It was discontinued after the 2001 model year.[1]
Applications:
The 3.5 L engine was expanded to 4.0 L; 241.2 cu in (3,952 cc) for the 2007 Dodge Nitro and Chrysler Pacifica. Like its family members, this is a SOHC engine and is built in Trenton, Michigan. DaimlerChrysler reportedly spent $155 million to expand the Trenton plant to manufacture this engine.[2]
Applications:
The DOHC 2.7 L Chrysler LH engine is based on this same design, though the bore, stroke, and production site are different.
| |||||||
---|---|---|---|---|---|---|---|
General |
| ![]() | |||||
Marques |
| ||||||
Divisions and subsidiaries |
| ||||||
Parent companies |
| ||||||
Predecessors | |||||||
Joint ventures and alliances |
| ||||||
People |
| ||||||
Places |
| ||||||
Products | |||||||
Related topics |
| ||||||
|